Using the Command and Response Tables for SIS Commands
The command and response tables begin on page 20. Figure 15 shows the hexadecimal
equivalent of ASCII characters used in the command and response tables.
NOTE: Upper and lowercase text can be used interchangeably unless otherwise stated.
Space
Figure 15.
Symbol Definitions
= Carriage return and line feed
]
= Carriage return with no line feed
}
|
= Pipe (can be used interchangeably with the
= Space
•
E
= Escape key
W
= Can be used interchangeably with the
ASCII to Hex Conversion Table
ASCII to Hexadecimal Conversion
XTP T HWP 101 Wallplate Transmitter • SIS Configuration and Control
•
}
character).
E
character.
19