Table of Contents
Advertisement
Extron LinkLicense
An Extron LinkLicense unlocks features that add convenience, expand system options, and
enhance the capabilities of Extron products. Each LinkLicense can be purchased separately
from the FOX3 device and activated as the need arises (A LinkLicense can be uploaded
using Extron Toolbelt software and the Toolbelt Help File. See
Installation
NOTE: A user must have an Insider Account to download and use ToolBelt Software.
LinkLicense upgrades available for the FOX3 receiver include the following:
•
Features
•
•
•
•
•
•
•
•
•
•
•
•
on page 31 to download Toolbelt).
Contact an Extron support representative, to obtain an Insider Account.
Uncompressed Video Upgrade —
•
This LinkLicense is enabled once and lasts for the life of the product.
•
Allows the FOX3 devices to pass uncompressed 4K @ 60 Hz video on the second
SFP module, enabling the highest video performance.
Receives fiber optic signals from FOX3 Series transmitters and provides scaled
HDMI video, stereo audio, RS-232 control, and IR control signals
High-performance scaler provides selectable output resolutions up to
4096x2160 at 60 Hz with 4:4:4 chroma sampling
Supports mathematically lossless 4K video up to 4096x2160 at 60 Hz with 4:4:4
chroma sampling over one fiber
Supports uncompressed 4K video up to 4096x2160 at 60 Hz with 4:4:4 chroma
sampling over two fibers
Supported HDMI 2.0 specification features include data rates up to 18 Gbps
and Deep Color up to 12-bit
HDCP 2.3 compliant
HDMI audio de-embedding with analog stereo outputs — Digital HDMI audio is
made available as a balanced or unbalanced analog stereo signal on captive screw
connectors.
Key Minder continuously verifies HDCP compliance for quick, reliable
switching — Authenticates and maintains continuous HDCP encryption between
input and output devices to ensure quick and reliable switching in professional AV
environments.
Bidirectional RS-232 and IR signal transmission over fiber optic cabling for AV
device control — Bidirectional RS-232 and IR control pass-through enables a remote
display to be controlled without the need for additional cabling. Two fibers are required
for bidirectional communications.
HDCP Visual Confirmation — When HDCP encrypted content is transmitted to
a non-HDCP compliant display, a full-screen green signal is sent to the display for
immediate visual confirmation that protected content cannot be viewed on that display.
HDMI video upscaling and downscaling — Features the built-in Extron-exclusive
Vector 4K scaling engine for optimized upscaling and downscaling of high-resolution
video signals.
On-screen display — Features an on-screen display that provides status data
pertaining to the currently selected input, facilitating easy adjustment of picture settings.
Software/Firmware
FOX3 SR 201 Scaling Receiver • Introduction
3
Advertisement
Table of Contents
