Error Responses; Using The Command And Response Table; Ascii To Hexadecimal Conversion - Extron electronics USB Extender Plus Series User Manual

Error Responses

If the extender is unable to execute a command it receives because the command is invalid
or contains invalid parameters, the USB Extender Plus returns an error response to the host.
The error response codes for USB Extender Plus include:
E10
E12
E13
E14
E22
E24
E25

Using the Command and Response Table

The
responses of the extender to the host, and descriptions of the command functions or the
results of executing the commands.

ASCII to Hexadecimal Conversion

The ASCII to Hex Conversion Table below is for use with the Command and Response
Table.
Space
— Invalid command
— Invalid port number
— Invalid parameter
— Not valid for this configuration
— Busy
— Privilege violation
— Device not present
Command and Response Table
ASCII to HEX Conversion Table
USB Extender Plus Series • Remote Configuration and Control
on page 25 lists valid ASCII command codes, the
•
23