Using The Command And Response Tables For Sis Commands; Symbol Definitions - Extron electronics XTP R HWP 201 User Manual

Using the Command and Response Tables for SIS Commands

The command and response tables begin on page 22. Figure 16 shows the hexadecimal
equivalent of ASCII characters used in the command and response tables.
NOTE: Upper and lowercase text can be used interchangeably unless otherwise stated.
Space
Figure 16.

Symbol Definitions

= Carriage return and line feed
]
= Carriage return with no line feed
}
| = Pipe (can be used interchangeably with the
= Space
•
E
= Escape key
W = Can be used interchangeably with the
ASCII to Hex Conversion Table
ASCII to Hexadecimal Conversion
XTP R HWP 201 Wallplate Receiver • SIS Configuration and Control
•
}
character).
E
character.
21