Overview And Operation Reset To Zero Device Yasxzero - YASKAWA MH24 Operating And Maintenance Manual

Maintenance and inspection
9.7.2
Data exchange in case of resetting to zero occurs between sensor and programming
pendant via the amplifier.
Scope of supply
The following elements are included in the box:
• Amplifier YasXzero
• Mains unit for power supply and for charging the battery.
• Sensor with connection cable to the amplifier.
• Extension cable RS232
• Connection cable RS232 with CF data transmission card for programming pendant.
Display and operating elements front panel
Socket sensor:
LED PWR (Power):
LED CHG (Charge):
LED BAT (Battery):
LED COM (Communication): Flickers when data between YasXzero and the program-
LED OK:
LED INF (Information):
LED RNG (Range):
POWER Key:
-
9 76

Overview and operation Reset to zero device YasXzero

SENSOR
Plug in the sensor cable.
Lights up when the power cable is inserted or when the de-
vice is on.
Lights up when the power cable is inserted and when the
battery is being charged.
Lights up when the battery must be charged. The devices'
runtime with battery is approximately 2 – 3 hours.
ming pendant are being transmitted.
Flashes at one-second intervals when the reset process is
taking place properly.
Lights up continuously in case of a hardware failure. Try to
restart the device. In case of further error signals please
contact your local YASKAWA branch office.
Without function
Lights up continuously when the sensor is in a ± 0,2 mm
range.
Flashes if the ± 5mm measuring range is exceeded.
To switch-on the device.
POWER