Epilog Laser LEGEND 24EX 6000 Owner's Manual page 227

Printing From AutoCAD
PRINTING FROM AUTOCAD 14 WITH WINDOWS XP
OR 2000
method is to set your drawing to "Paper" mode before creating your file (double
clicking on this box toggles between Paper and Model). It is more difficult to
properly locate objects if you print from "Model" mode. For further information
about printing from Model mode, proceed to "Printing From AutoCAD 2000 From
Appendix C
213
Start with a simple drawing.
The following instructions
assume that your file has been
created on a page size (Limits)
that matches the bed size of
your laser system.
following examples use a 32 x
20 inch (812 x 508 mm) page
size.
NOTE - While there are
several methods of printing
from AutoCAD, the easiest
Windows XP/2000".
your drawing is ready to print,
click on File | Print.
The Print/Plot Configuration
window opens. Click on Pen
Assignments...
The
Once