Section 4: Connecting And
Configuring Your Computer –
Print Driver Installation
In This Section
Printer Installation
Network Printing
Parallel Printing
USB Printing
Epilog provides a custom print driver for use with Windows XP or 2000. The
driver is included in the accessories kit on a CD-ROM. The Legend print driver is
the software that allows your computer to talk to your Legend laser system. In
order for your computer to talk to your Legend system, you will need to make a
cable connection from the computer to the Legend. There are three basic ways
that you can connect your new Legend to your computer:
Ethernet Connection. There are several different ways of configuring your
computer to use the Ethernet connection:
You can make a direct connection from your computer to your Legend using a
crossover cable (this is the only method that will be described in detail).
You can connect the Legend to your computer and your Local Area Network without
using a hub.
You can connect the Legend to your computer and your Local Area Network using a
hub.
Parallel Connection – Parallel cables over 10 feet in length should not be used
due to the increased potential for data transmission errors.
USB to Parallel converter cable (available at your local computer store).
Epilog suggests that you use a crossover cable to create a direct connection from
your computer to your Legend.
providing faster transfer speeds, and much higher reliability than a parallel cable,
The crossover cable has the advantage of
25
Need help?
Do you have a question about the LEGEND 24EX 6000 and is the answer not in the manual?