Oce sx1481 User Manual page 71

Press <Advanced Functions> repeatedly until "Zoom" appears, then
press <Enter>. Press < q > or <p> to adjust the zoom ratio.
– or –
Enter your desired ratio (50 to 100 %) using the numeric keys.
NOTE
• The minimum reduction ratio is 75 % at 200 dpi.
• To reset the settings to the default, press <Reset>.
• Document type — Press <Doc. Resolution> then press <t> or <u> to
select the document type:
Text: Select this mode when scanning text.
Photo&Text: Select this mode when scanning documents containing
photographs or drawings and text.
Photo: Select this mode when scanning photographs or drawings.
• Contrast — Press <Contrast> to set how light or dark you want the
documents to be. To avoid confusing the Light and Dark settings, just
remember — "Light lightens" and "Dark darkens".
4
Press <Start>.
Select Scan Box
01:01
5
Press < q > or <p> to select the scan box, then press <Enter>.
If the scan box has an I.D. code other than "0000", the following display
will appear, and go to step 6. Otherwise, skip to step 7.
01:Store Document
Enter I.D. Code:****
6
Use the numeric keys to enter the scan box's four-digit I D. code, then
press <Enter>.
If you enter an invalid I.D. code, the machine will return to the standby
mode.
7
The machine will start scanning and will show:
01:Store Doc.File: 1
NextDoc �tr Mem100%
A file number is assigned to every document scanned into the scan box
(1 to 10).
8
If you want to scan additional documents, press <Next Doc.> while scan-
ning and proceed to step 9. Otherwise, the machine will return to the
standby mode after it has finished scanning.
5-7