Oce sx1481 User Manual page 50

3
1) Adjust the paper guides to fit the paper, 2) then lower the flapper
release lever.
4
After loading paper into the bypass tray, you need to set the correct paper
size. Press <Advanced functions> repeatedly until "Bypass" is displayed
on the LCD and then press <Enter> (if one of your soft key has been
assigned to "Bypass", press it).
B�pass Tra� �pass Tra�
5
Press < q > or <p> to select the paper size you want to use.
B�pass Tra�
6
Press <Enter>.
NOTE
You can set the default paper size for the bypass tray. See "Setting of
the default paper size for the bypass tray" on the next page.
7
On your computer, display the "Paper" tab of the printer driver, and then
specify "Bypass" for the "Paper source" setting (see
8
Specify the "Paper Size" and "Paper Type" setting depending on the paper
you want to use (see
9
Execute the print operation from your computer.
3-12
:�tr :�tr
 /  /Enter
:�egl
 /  /Enter
pages 3-4 to 3-5).
pages 3-4 to 3-5).