Broadcasting - Oce sx1481 User Manual

5
Use the numeric keys to enter the three-digit identifier for the speed-dial
number you want to dial. The machine shows the name (or mail address)
you have stored.
6
Press <Start>.

6.7.4 Broadcasting

Your machine allows simultaneous communication with normal G3 fax and
Internet fax.
1
Switch to the fax mode by pressing <
2
Load the document in the ADF.
3
Adjust the document resolution and contrast, if necessary.
4
Press <Advanced Functions> until "Broadcast" appears on the LCD,
Broadcast
then press <Enter>.
– or –
Select the "Broadcast" soft key.
5
Enter the first destination using either a one-touch key, speed-dial num-
ber, or the numeric keys. If you want to enter an e-mail destination using
the numeric keys, see "6.7.1 Using numeric keys" on
ABCD
[01]
6
To add more destinations, repeat the step 5.
If you want to enter the next destination using the numeric keys, you
should enter a comma by pressing "Broadcast" (see step 4) before enter-
ing next destination (if you select a one-touch key or speed-dial number
the machine will insert a comma automatically).
You can send to up to 230 destinations (40 one-touch keys, 160 speed-dial
numbers and 30 directly entries) for a single broadcast.
Address
[01],S001,To :_
7
Press <Start>. Your machine scans the document into memory and then
sends it to each destination you have entered.
NOTE
• For details of the soft key, see Chapter 8 of your machine's user
manual.
• If you enter characters by mistake, press <Cancel> to delete them.
• If you frequently broadcast documents to the same location, use
the call group dialing for your convenience (see Chapter 3 of your
machine's user manual).
 
/ /Enter
;�ower
>.
4 4
copy fax scan
page 6-16.
6-17