6.4.2 E-mail environment settings
These are important settings that allow the system to send and receive
e-mail. Please consult your system operator and/or network administra-
tor before entering these settings. Entering improper settings can prevent
system operation and may cause lost or delayed mail.
1
On you machine's control panel, press <Menu>, <6>, <2>.
[Program]
2 Mail Environment
2
Press <Enter>.
[Program]
01 Name
3
Press < q > or <p> to select the desired parameter and press <Enter>.
For example, SMTP server settings:
[Program]
03 SMTP Server
4
Press <Enter>.
SMTP Server;�ower
_
5
Use the numeric keys to enter the SMTP server IP Address or SMTP
server name and press <Enter>.
The Port No. setting display will appear.
6
Use the numeric keys to enter the port number and press <Enter>.
Normally, set to "25".
Port No.(25)
(00000-65535)
7
For some providers, POP authentication is required before sending (send
request to SMTP server). In this case, set to on.
POP before SMTP :Off
8
Press <Enter>. To set other parameter go back to step 3. To return to
standby, press <Reset>.
No.62_
No.6201
No.6203
00025
/
/Enter
6-5