Oce sx1481 User Manual page 31

2
Select "Off" by using <q> or <p>.
DHCP Setting
 /  /Enter
Press <Enter>.
3
Enter the appropriate IP address using the numeric keys. To move the
cursor press <t> or <u>. To delete a number, press <Cancel>.
IP Address
192.168.
Press <Enter>.
4
Enter the address of the subnet mask.
Subnet Mask
255.255.255.
Press <Enter>.
5
Enter the address of the primary gateway ("Gateway 1" on the LCD),
then press <Enter>.
6
Enter the address of the secondary gateway ("Gateway 2" on the LCD),
then press <Enter>.
7
Enter the address of the primary DNS server ("DNS Server 1" on the
LCD), then press <Enter>.
8
Enter the address of the secondary DNS server ("DNS Server 2" on the
LCD), then press <Enter>.
9
When all these network settings are completed, the LCD shows the
following message (if you want to return to the standby mode, press
[Reset]). To activate the settings, turn the machine off and after a few
moments turn it on.
To Implement Change,
Please Power Off/On
NOTE
To activate the settings, you need to shutdown the machine.
10
Go to "Verifying the IP settings"
NOTE
After you set the IP address, you can configure the network settings
using a web browser (see "Configuring an IP address" on
:Off
1. 10
0
on the next page.
page 6-11).
2-5