Scanning A Document Into A Scan Box - Oce sx1481 User Manual

5.4.3 Scanning a document into a scan box

NOTE
• To use the SB mode, you must set up a scan box on your machine (see
"Setup a scan box" on
• In SB mode, only "Black & White" scan job is available.
1
Press <
When the machine is in the scan mode, the machine shows:
Scan Ready
2
Place the document face up in the automatic document feeder (ADF).
3
Adjust the following settings, if necessary.
• Scanning size — Press <Doc. Size> to select the scan size.
Inch version: Letter (8.5" × 11"), Legal (8.5" × 14"),
Metric version: A4 (210 × 297 mm), A5 (148 × 210 mm),
You can also select "Auto". When you select "Auto", custom size docu-
ments (up to 35.4 inch (900 mm) in length) can be scanned.
• Resolution — Press <Doc. Resolution> to select the resolution from
200 dpi, 300 dpi or 600 dpi.
• Zoom ratio — Press < q > or <p> to select a preset ratio.
Inch version
• 50%: Min.
• 64%: (8.5" × 11") g (5.5" × 8.5")
• 78%: (8.5" × 14") g (8.5" × 11")
• 100%
50%, 64%, and 70% are not available in 200dpi.
– or –
5-6
page
> to change to the scan mode.
4 4
copy fax scan
200dpi
Ltr 100%
Scanning size
Half-letter(5.5" × 8.5")
F4 (216 × 356 mm)
5-4).
Resolution
Zoom ratio
Metric version
• 50%: Min.
• 70%: (A4 g A5)
• 81%: (B5 g A5)
js
• 86%: (A4 g B5
• 100%
)
js