q Scanner auto reset
The scanner settings are initially set to return to their default condition auto-
matically after the machine has been idle for 3 minutes. You can, however,
change this time from 1 to 10 minutes. Also, you can program the settings to
return to their default condition as soon as the scanning has been completed.
1
Press <Menu>, <2>, <4>, <2>, <Enter>.
Auto Reset Time
(01-10)
2
Use the numeric keys to enter the time for auto reset time. Then, press
<Enter>. Enter a leading zero when entering a quantity less than 10
(Ex. 01).
3
The machine will ask you whether the machine should reset to the
default settings after the scan job has been completed.
Reset After Scan:Off
4
Use <q> or <p> to select the setting.
5
Press <Enter> to save the setting.
To finish, press <Reset>.
5.4.8 Printing a list of scanner settings
To print a list of your scanner settings, press <Menu>, <5>, <1>, <1>, <9>,
<Enter>.
03 min.
/
/Enter
5-15