Printer Trouble - Oce sx1481 User Manual

7.4 Printer trouble

Symptom
Alarm lamp illuminates. Is any error message dis-
Cannot print.
Cannot print on specified
paper.
Printing speed is slow.
7-4
What to confirm
played on the LCD?
Is the machine turned on?
Is the USB cable or LAN
cable connected properly?
Did you choose the correct
printer port?
Is any error message dis-
played on the LCD?
Has the correct IP address
been set on your machine?
(Only when using network)
The printer driver may not
be installed properly.
Setting on application
software is incorrect.
Computer may not have
enough memory.
The print job is large or
complex.
Suggested solutions
Confirm the displayed message and
fix the issue (see page
Turn the machine on by pressing the
[I] side of power switch.
Check the cable connection.
Check whether the printer port set-
ting is correct on your computer.
With a local printer, the printer port
should be USBxxx (xxx represents
port number).
With a network printer, lpr port of
the same address as IP address set
on this unit should be selected.
If the wrong printer port has been
selected, change it to the correct one.
Confirm the displayed message and
fix the issue (see page
Confirm the correct IP address with
network administrator and set the
correct one.
Reinstall the printer driver.
Check set paper size in application
software. Then confirm "Paper Size"
setting on set window for printer
driver. If both are not reflected
on actually printout, change those
settings.
Install more RAM in your computer.
The machine takes a lot of time
when printing a large print jobs.
Please wait until the machine fin-
ishes the job.
7-3).
7-3).