Change the [Output] settings
Change [2-sided] into [1-sided] and vice versa
Introduction
Jobs for which [1-sided] or [2-sided] printing was defined, will be printed on either 1 side or both
sides of a sheet. If required, you can change this setting.
When a job contains mixed settings ([1-sided] and [2-sided]), you can change this setting to [1-
sided] or [2-sided] for the complete job.
NOTE
You cannot change this setting for the active print job .
Procedure
1. Touch [Jobs] -> [Queues] -> [Scheduled jobs] or [Waiting jobs].
2. Touch the job you want to change.
3. Touch [Properties] - or touch the job 2x to open the [Properties] window.
4. Touch the [1- or 2-sided] button.
5. Touch the desired value.
6. Press [OK].
Océ VarioPrint 6000 line
Change the [Output] settings
Chapter 9 - Carry out print jobs
143