Mitsubishi Electric MELSEC-A0J2H Series Handbook page 154

8
REPLACING THE COMMUNICATION MODULES
Point
(1) The I/O module of remote station A0J2C25 is an A0J2 I/O module.
Using the renewal tool for A0J2 (manufactured by Mitsubishi Electric System & Service Co., Ltd.)
for replacement with CC-Link can eliminate the need for mounting hole drilling for the alternative
module and enables reuse of I/O external wiring, and thus can reduce replacement man-hours.
For details, refer to the Section 1.2.
(2) For a product from a partner manufacturer, ask the partner manufacturer whether they have an
alternative product with the equivalent functions and specifications for CC-Link.
For contact information, check the website of "CC-Link Partner Association".
(3) When the multidrop link module does not remain to be used as a spare, the replacement of the
A0J2-C214S1 is difficult.
(Note that new purchases of existing modules are not possible and the repair acceptance period
cannot be extended.)
8
- 3