Mitsubishi Electric MELSEC-A0J2H Series Handbook page 72

3
I/O MODULES REPLACEMENT
Specifications
Current consumption
External connection
method
Applicable wire size
Applicable solderless
terminal
External dimensions
Weight
*1 Use the QX70 when using 12VDC.
*2 Check the specifications of the sensor or switches to be connected to the QX40.
3
- 31
A0J2-E56DT
0.225A (TYP. All points are ON.)
36-point terminal block
connector
(M3 × 6 screws) 2 pieces
2
0.75 to 2mm (Outside diameter: 2.8mm or
1.25-3, 1.25-YS3A,
2-S3, 2-YS3A,
(Sleeved solderless terminals
V1.25-3, V1.25-YS3A,
V2-S3, V2-YS3A
250(H) × 190(W) × 41(D) mm 98(H) × 27.4(W) × 90(D)mm × 4
1.04kg 0.16 × 2 + 0.17 × 2 = 0.66kg
: Compatible,
QX40/QY50 Compatibility
0.05 × 2 + 0.08 × 2 = 0.26A
(TYP. All points are ON.)
18-point terminal block
(M3 × 6 screws) 4 pieces
2
0.3 to 0.75mm core
less)
R1.25-3
cannot be used.)
: Partially changed, × : Incompatible
Precautions for replacement
Review current capacity since
current consumption is increased.
×
×
Wiring change is required.
×
× The dimensions are different.