ABB 2600T Series Instruction Manual page 67

2 6 0 0 T S E R I E S | P R E S S U R E T R A N S M I T T E R S | O I/ 2 6 6/ F F - E N R E V. E
Block Mapping
Idx Parameter
0 BLOCK_OBJ
1 ST_REV
2 TAG_DESC
3 STRATEGY
4 ALERT_KEY
TARGET
ACTUAL
5 MODE_BLK
PERMITTED
NORMAL
6 BLOCK_ERR
7 UPDATE_EVT
8 BLOCK_ALM
9 TRANSDUCER_DIRECTORY
10 TRANSDUCER_TYPE
11 TRANSDUCER_TYPE_VERSION The version of the transducer identified by TRANSDUCER_TYPE in the form 0xAABB where AA is the major
12 XD_ERROR
13 COLLECTION_DIRECTORY
14 PILD_COMMAND
Description / Range / Selections / Notes
In the Block Object data structure, there are different items describing the block characteristics. Execution period,
Number of parameters in the block, the DD Revision, Profile Revision, View Objects characteristics and so on
The revision level of the Static data associated with the Function Block. The revision level is incremented each time a
static parameter value (S – under Storage) in the block is changed.
The user description of the intended application of the block
The strategy field can be used to identify grouping of blocks. This data is not checked or processed by the block.
The identification number of the plant unit. This information may be used in the host for sorting alarms, etc.
AUTO / OOS
AUTO / OOS
AUTO
This parameter reflects the error status associated with the hardware or software components associated with a
block. It is a bit string, so that multiple errors may be shown.
Bit 6 = Device Needs Refer to the section "Diagnostic, Block_err and Status Byte" from page 29
Maintenance Soon
Bit 15 = Out of Service The MODE_BLK_ACTUAL = Out of Service.
This alert is generated by any change to the static data
The block alarm is used for all configuration, hardware, and connection failure or system problems in the block. The
cause of the alert is entered in the sub-code field. The first alert to become active will set the Active Status in the
status parameter. As soon as the Unreported status is cleared by the alert reporting task, another block alert may be
reported without clearing the Active Status, if the sub-code has changed
Directory that specifies the number and starting indices of the transducers in the transducer block
Identifies the transducer type.
revision of the transducer specification on which the transducer is based, and BB is a revision number assigned
and controlled by the manufacturer of the device.
Transducer block error sub-code
Directory that specifies the number, starting indices, and the DD items IDs of the data collections in each transducer
within a tb
0: IDLE
Activation /
deactivation of 1: GO_OFF
the PILD 2: TRAIN
algorithms 3: STOP TRAINING
0: OFF
Status of the
1: NORMAL
PILD algorithm
2: TRAINING
The selectable modes by the operator.
The mode the block is currently in.
The allowed modes the operator can select as Target
The common mode for the Actual.
default value
Switch OFF the PILD algorithm
Start the training phase
Stop the training phase of the algorithm before its natural ending
The algorithm is Inactive (Default value)
The algorithm is Active
The algorithm is in training phase
67