ABB 2600T Series Instruction Manual page 122

122 2 6 0 0 T S E R I E S | P R E S S U R E T R A N S M I T T E R S | O I/ 2 6 6/ F F - E N R E V. E
.........parameters that can be changed as desired opening the "Parameters" box of the device with a right mouse click. From this
box is also possible select the Backup Link Master function (LAS) of the device.
Design of the Function Block Application (FBAP)
Select the FF Function Block Application section. In the lower part of the screen appears the list of the selected devices and their
function blocks. The yellow colour of the blocks means that they are not yet used and thus available. With a drag and drop of the
mouse on these blocks is possible move them in the box above ready to be, renamed and linked with other blocks of the same or
other devices in order to achieve the desired control strategy.