ABB 2600T Series Instruction Manual page 127

2 6 0 0 T S E R I E S | P R E S S U R E T R A N S M I T T E R S | O I/ 2 6 6/ F F - E N R E V. E
127
......and the Function Blocks start to work normally. In the example below the 266 PdP Analog Input block produces the measured
pressure value in output
Device and/or Blocks configuration
Whenever the 266 PdP is in this condition, it is then possible open any of the used blocks for read/write operations.
A double right mouse click, when the cursor is over the desired block, open it and the contained variables are read and shown.