20
2 6 0 0 T S E R I E S | P R E S S U R E T R A N S M I T T E R S | O I/ 2 6 6/ F F - E N R E V. E
Figure 19: Model 266H or 266N High overload resistant P-Style transmitter with sensor Z with barrel housing installed on a 2"pipe with
optional bracket (B1 carbon steel or B2 Stainless Steel 316L)
NOTICE
Potential damage to transmitter. In case of FOUNDATION Fieldbus gauge pressure transmitter with 1050 bar/15000 psi sensor
range (266HSH.Z or 266GSH.Z) and 1/4" NPT process connection, please always perform sensor low trimming to remove
possible zero shift and a prevent serious decrease of the total performance in terms of accuracy. Sensor low trim can be
performed from DD based FF Masters.
18 (0.71)
Figure 20: Model 266G or 266A P-Style transmitter with barrel housing installed on a 2"pipe with optional bracket
(B1 carbon steel or B2 Stainless Steel 316L)
91 (3.58)
72 (2.83)
116 (4.57)
113 (4.45)
Ø65 (2.56)
105 (4.12)
18 (0.71)
105 (4.12)
29 (1.14)
18 (0.71)
27 (1.06) width across
113 (4.45)
29 (1.14)
18 (0.71)
23 (0.9) width across
flats of exagon
Ø65 (2.56)
91 (3.58)
1/2 - 14 NPT
flats of exagon
72 (2.83)
116 (4.57)