2 6 0 0 T S E R I E S | P R E S S U R E T R A N S M I T T E R S | O I/ 2 6 6/ F F - E N R E V. E
For safety reasons, take care of the drain/vent valves position
so that when the process fluid is removed during the drain/
vent operation it is directed down and away from technicians. It
is recommended to mount the transmitter to prevent this
possible source of damage for unskilled operators.
Figure 6: Drain/vent valves configuration (respectively V1, V2, V3)
IMPORTANT
In case of a High Static differential pressure transmitter,
please notice that the Vent/Drain valves can be configured
only on the process axis (V1).
13