I3S (Idle Stop Start System) - HERO SPLENDOR iSMART PROGRAMMED FI Manual

2
(1) Electric starter switch
2. i3s switch
There is an i3s switch
the rider for turning i3s mode "ON" or "OFF"
based on the traffic conditions.

i3s (IDLE STOP START SYSTEM)

Starting & Warm up the engine:
Keep the i3s switch (1) to "OFF" position.
Turn the ignition key to "ON" ( ) position.
1
(1) i3s switch
(2) i3s switch
(2) provided to enable
The i3s indicator (2) will glow on the
speedometer console for 2 seconds and turn
"OFF". For the activation of i3s system, start the
engine and let it idle till the engine gets warmed
up or temperature reaches more than 75°C.
1
2
(2) i3s indicator
Initial activation of the i3s system:
Keep the i3s switch (1) to "ON" position.
Turn the ignition key to "ON" position. The
i3s indicator (2) on the speedometer console
will glow for 2 seconds and turn "OFF". Start
the vehicle (in neutral and clutch lever released
condition) with less than 2000 r/min and let
it idle till engine temperature reaches more
than 75°C. The engine will cut-off in 30
seconds. After the first stop start, every
subsequent stop will be in 5 seconds.
In this condition, the engine can be restarted
either with clutch lever, kick or electric start.
Driving with i3s switch in "ON" position:
While driving, if the engine is kept idling (while
waiting in a traf c signal), the engine will cut fi
17