Starting The Logger; Push Button Start - LogTag Recorders UTREL30-WiFi Product User Manual

Wireless low-temperature data logger

Hide thumbs Also See for UTREL30-WiFi:

Table of Contents

Starting the Logger

It is highly recommended you start a UTREL30-WiFi logger only

placed it in the position it will be used in. This allows you to verify wireless and

network connectivity on site quickly after the start.

After configuration for a push button start the

current time and

READY

the

Backup Battery Status

The power symbol is shown when the unit is

connected to a USB power supply.

WiFi and cloud connection symbols are also shown

with a tick, if the UTREL30-WiFi successfully

connected to the wireless network directly after

configuration with LogTag

Press the

START

/CLEAR/STOP

briefly shown in addition to

Then

disappears.

READY

UTREL30-WiFi User Guide

are shown, together with

symbol.

Analyzer.

button.

STARTING

READY.

after

you have

Table of Contents

Do you have a question about the UTREL30-WiFi and is the answer not in the manual?