Table of Contents
Advertisement
Wireless Connectivity
If you are part of more than one team, the name of the team for which you want to
l
register the logger
Transferring data to LogTag
Temperature readings
Measurements recorded by the UTREL30-WiFi are stored in internal memory, ready to be
uploaded to the LogTag
pre-determined times that cannot be changed:
If the logger is permanently powered via USB power supply
l
The upload to the server takes place every log interval, or multiple thereof, but no
sooner than every 5 minutes.
For example, a logger that records every 2 minutes will upload readings to the cloud
server every 6 minutes, a logger that takes a reading every 15 minutes will upload
readings to the cloud server every 15 minutes.
If a logger is scheduled to take a temperature reading and also upload
readings to the server at the same time, the temperature reading will always
be taken first before the upload starts.
If the logger is powered via the AAA batteries
l
The upload to the server takes place every log interval, or multiple thereof, but no
sooner than every 60 minutes.
For example, a logger that records every 15 minutes will upload readings to the cloud
server every 60 minutes, a logger that records every 45 minutes will upload readings
every 1½ hours.
Alarms
As soon as a UTREL30-WiFi triggers an alarm, this is reported to the cloud server
immediately, regardless of the upload interval for temperatures.
Wireless and Cloud Symbols
On the display, wireless connection and link to the LogTag
shown using the wireless and cloud connectivity symbols.
This symbol shows the status of the last connection to the wireless network
UTREL30-WiFi User Guide
®
Online
®
Online cloud server. The upload to the server is taking place at
®
Online cloud server are
29
Advertisement
Table of Contents
Need help?
Do you have a question about the UTREL30-WiFi and is the answer not in the manual?