Logtag® Online Connection Wizard - LogTag Recorders UTREL30-WiFi Product User Manual

Preparing a UTREL30-WiFi for first use
®
LogTag Online Connection Wizard
To connect a new UTREL30-WiFi to LogTag
Wizard. You can access the wizard by clicking
®
LogTag Online menu in LogTag
®
The LogTag Online Connection Wizard is a separate program that
registers the UTREL30-WiFi against your account;
l
enables you to create an account with LogTag
l
an account); and
allows configuration of wireless and network parameters of your UTREL30-WiFi.
l
You can find detailed information about the LogTag
online help at https://logtagrecorders.com/download/LTO-Connection-Wizard-QSG.pdf.
®
The LogTag Online Connection Wizard starts after the logger has been configured for
other parameters such as logging and alarms. When the wizard runs, the wireless and
network parameters you enter are used to check that the UTREL30-WiFi can establish a
connection with your wireless network and the LogTag
UTREL30-WiFi's display will update during these connection checks.
Initially, the display shows the logger is ready to be
started.
When the Wizard displays
please wait, first, the wireless connection is tested.
If the connection is successful, the screen on the
right shows.
If the wireless connection does not succeed, the "No
wireless connection" symbol (
and the test aborts.
Please refer to the section about
page 34) for reasons why the wireless connection can
fail.
4
You can also download the LogTag
UTREL30-WiFi User Guide
®
Online use the
® 4
Analyzer .
Testing Connection,
) is shown instead,
Troubleshooting (on
Online Connection Wizard as a separate installer from the LogTag Recorders website.
®
LogTag
Connection Wizard
®
Online (or sign in if you already have
®
Online Connection Wizard in its
®
Online cloud server. The
®
Online Connection
from the
26