LogTag Recorders UTREL30-WiFi Product User Manual page 20

Preparing a UTREL30-WiFi for first use
UTREL30-WiFi Start Options
During configuration with LogTag
starts taking temperature readings:
Push button start
The logger will start taking temperature readings as soon as you have pressed the
button (see
START
/CLEAR/STOP
When you choose the push button start option, you can
disable it) and also Begin recording after a
Pre-start readings
If you enable pre-start readings, the UTREL30-WiFi starts recording as soon as it is
unplugged from the USB port
button. No alarms are processed while pre-start readings are being taken, pre-start
readings will not appear in the PDF file after the logger was started, and no PDF file will be
generated if only pre-start readings are present in the logger. Pre-start readings are also
not uploaded to LogTag
if you forget to start the unit, as you can still access the data using LogTag
Start delay
If you configure the UTREL30-WiFi to start after a delay period, the logger will not
immediately record temperature readings after you have pressed
start a countdown timer instead, and record readings only after the timer has ended. The
value for the timer is set during configuration. If pre-start readings are enabled, these will
continue to be recorded during the delay period.
Date/Time start
The logger will start taking temperature readings at the date and time you enter during
configuration (local time). You cannot combine a date/time start with pre-start readings or
the start delay function.
Automatic start via LogTag
The logger will start as soon as it has received configuration settings via the locations's
Logger configuration
temperature readings instantly, or after a delay period.
2
The first pre-start reading is taken one log interval after you unplug the unit from the USB port.
UTREL30-WiFi User Guide
®
Analyzer you can decide when the UTREL30-WiFi
Starting the Logger on
2
and will continue to do so until you start the unit via the
®
Online. Using pre-start readings is a good way to avoid data loss
®
Online
profile. Depending on the profile settings, it may start taking
page 46).
Enable pre-start logging
delay.
(or
®
Analyzer.
, but
START
/CLEAR/STOP
20