Automatic Date/Time Start - LogTag Recorders UTREL30-WiFi Product User Manual

Starting the Logger
The timer can be cancelled and the logger reset to
.
READY
While and
STARTING
hold the
START
/CLEAR/STOP
show. Release the button when
disappears.
and
STOPPED DELAY
will show, together with the current time, and the
logger can now be started again as normal.
The UTREL30-WiFi will not be reset if you
release the button before
l
or
keep holding the button until
l
disappears.

Automatic date/time start

If you configured the UTREL30-WiFi for a date/time
start, it will start recording temperature values as
soon as the entered start time is reached. Until then
the logger will display the screen on the right.
Once the configured start time is reached, the logger
shows the normal recording display.
The UTREL30-WiFi will perform a
check the connection before the start time is reached, you can initiate the connection test
yourself. Please refer to
Hibernating the logger using LogTag
configured Date/Time start.
UTREL30-WiFi User Guide
are shown, press and
DELAY
button.
STOPPED
STARTING
will both disappear, and
STARTING
STOPPED
Connection Test
Testing your wireless and network connection (on
will now
READY
disappears;
as soon as the recording has started. To
®
Analyzer will abort any previously
48
page 31).