Table of Contents
Advertisement
Features
REVIEW
/MARK
l
This is used to review data recorded during the trip directly on the display, to reset
the min/max data on the display and to stop the unit.
It is also used to place an inspection mark in the data listing and.
button ( )
F
N
l
This button is used together with one of the other buttons to force uploading data to
®
LogTag
Online or to enter Airplane mode.
Display and LED
The extra large display shows current, minimum and maximum temperatures and if alarm
events have occurred for the current day and up to 29 days in the past. Details of any
alarm event can be checked by inspecting the statistics history on the logger's display or
in more detail via your LogTag
if an alarm event has occurred.
External Probes
The UTREL30-WiFi will accept any external probe from the ST10 product range.
Communication
The UTREL30-WiFi offers two means of downloading data:
1. Use the built-in Micro USB socket to transfer data directly to a PC.
2. Use the WiFi connection to upload data to LogTag
The unit is configured via a PC using LogTag
configured using the LogTag
Power Supply
The same USB socket that is used for communication is also used for providing power to
the UTREL30-WiFi, using an external 5V USB power supply. The AAA backup batteries
maintain all functionality when USB power is not connected. A long-life CR2032 lithium
backup battery maintains essential functions if the AAA batteries are empty and external
power is not supplied.
The UTREL30-WiFi will generate a detailed PDF report when plugged into a USB port of a
PC. The PDF report shows a summary of the trip, presents the data in chart and list format
button ( )
®
Online cloud account. In addition, a red Alarm LED shows
®
Online Connection Wizard.
UTREL30-WiFi User Guide
®
Online.
®
Analyzer. Wireless connection data are
10
Advertisement
Table of Contents
Need help?
Do you have a question about the UTREL30-WiFi and is the answer not in the manual?
Questions and answers