Hibernating A Utrel30-Wifi - LogTag Recorders UTREL30-WiFi Product User Manual

Wireless low-temperature data logger

Hide thumbs Also See for UTREL30-WiFi:

Table of Contents

Hibernating a UTREL30-WiFi

When hibernated, the logger's power consumption is near zero. Hibernating a logger is

useful for conserving battery life when the logger is not used for extended periods.

If you hibernate the logger for longer than a week, please remove the AAA batteries from

the logger to avoid them leaking.

UTREL30-WiFi loggers are placed into Hibernation using LogTag

Hibernate from the LogTag menu.

Initially, the display shows SLP on the display until

you remove the logger from the USB port.

A hibernated logger has no active display, however a

button press will wake the logger up briefly. The

display will show

the text

NOT READY

the battery capacity of the AAA batteries (if the

batteries have been removed, the empty symbol

will be shown).

After a few seonds SLP will be shown on the display,

and the display will turn off.

The logger reverts to being hibernated.

A hibernated logger cannot be reactivated via the buttons - it must be reconfigured

with LogTag

UTREL30-WiFi User Guide

; and

Analyzer.

Analyzer by clicking

Table of Contents

Do you have a question about the UTREL30-WiFi and is the answer not in the manual?