Airplane Mode; Replacing The Batteries - LogTag Recorders UTREL30-WiFi Product User Manual

Airplane Mode

Airplane Mode
A UTREL30-WiFi can be switched to airplane mode to comply with airlines' regulations for
wireless transmission in aircraft. You can enable Airplane mode using the buttons on the
UTREL30-WiFi:
Press and hold the
l
buttons simultaneously.
Keep holding the buttons while the Airplane
l
mode symbol ( ) on the display blinks.
After approximately 6 seconds the symbol
l
stops blinking and turns on permanently.
Release the buttons.
Airplane Mode is now turned on, and all wireless
functionality is disabled. Cloud and WiFi connection
symbols are off.
After removal of the logger from the aircraft, airplane mode can be turned off, using the
exact same procedure:
Press and hold the
l
buttons simultaneously.
Keep holding the buttons while the Airplane
l
mode symbol ( ) on the display blinks.
After approximately 6 seconds the symbol
l
stops blinking and turns on permanently.
Release the buttons.
Airplane Mode is now turned off, and the wireless
functionality is enabled. Cloud and WiFi connection
symbols will turn on successively as they go through
the process of connecting to LogTag

Replacing the Batteries

When the display shows that the battery is almost empty (
fitted. Open the case as described in
batteries and complete the remainder of the procedure.
UTREL30-WiFi User Guide
and
F START
N /CLEAR/STOP
and
F START
N /CLEAR/STOP
®
Online.
Inserting the Batteries on
) new batteries should be
page 15. Remove the old
74