LogTag Recorders UTREL30-WiFi Product User Manual page 63

Wireless low-temperature data logger

Hide thumbs Also See for UTREL30-WiFi:

Table of Contents

Stopping the UTREL30-WiFi

The last recorded temperature is now no longer

shown, but minimum and maximum trip values

remain.

The logger will not stop if you

release the button before the

disappears; or

keep holding the button after

remains permanently on until the

reappears.

The UTREL30-WiFi will now connect to LogTag

temperature readings.

Once the logger has stopped, the last alarm status before the logger stopped will

continue to be indicated with a cross or a tick symbol on the display, but the

audible alarm and the alarm LED will turn off (see exception below).

If an ALARM is present ( ) and the

is enabled, you will need to clear the alarm first before you can stop the logger.

Please see

Clearing an Alarm

shown for the alarm status once the logger has stopped.

UTREL30-WiFi User Guide

symbol

STOPPED

symbol

Online to upload any outstanding

Clear alarm by pressing STOP button

for more information. In this case, a tick will be

function

Table of Contents

Need help?

Do you have a question about the UTREL30-WiFi and is the answer not in the manual?