Advertisement
Quick Links
SOFTWARE DOWNLOAD AND QUICK START GUIDE
FOR MULTI-USE LOGTAG RECORDERS
(TRID30-F, TRED30-7R- display loggers)
LogTag recorders are received in a "hibernation" state to conserve battery
life.
Prior to use they must be configured to suit your requirements.
Step 1:
Download LogTag Analyser as follows:
Click on link –
http://logtagrecorders.net/download/software/analyzer/release/ltanalyzer_28r2.exe
st
Click on the software drop down menu and select analyser (1
down)
Download – LogTag Analyser 2.7 release 10– All languages.
LogTag Analyser will automatically download and create a desktop
shortcut.
YOU ARE NOW ENABLED TO CONFIGURE AND READ LOGTAGS
Step 2:
Plug in your USB cradle (it will self-install) and then open the
LogTag Analyser programme.
Tel: 021 852 7686
Fax: 086 664 7173
Email: info@logtagdata.com
43 Bright street, Somerset West, 7129
Advertisement
Related Manuals for LogTag Recorders TRID30-F
Summary of Contents for LogTag Recorders TRID30-F
- Page 1 SOFTWARE DOWNLOAD AND QUICK START GUIDE FOR MULTI-USE LOGTAG RECORDERS (TRID30-F, TRED30-7R- display loggers) LogTag recorders are received in a “hibernation” state to conserve battery life. Prior to use they must be configured to suit your requirements. Step 1: Download LogTag Analyser as follows: Click on link –...
- Page 2 Step 3: (Configure) Insert the desired LogTag into the USB cradle. A blank screen will appear with a menu bar along the top. Click on LogTag on the top menu and select „Configure‟ in the drop down menu. The program will automatically complete step one „Locate LogTag‟ ( left screen) Step 4: You will now be on Step 2 of the programme >...
- Page 3 After configuration click „Next‟ – Wait for command and click „Next‟ to ensure LogTag is ready for use. Example: Configuration Screen. To continue: click-Next >. Tel: 021 852 7686 Fax: 086 664 7173 Email: info@logtagdata.com 43 Bright street, Somerset West, 7129...
-
Page 4: Configuration Notes
Configuration options will be loaded onto the Logtag device for use. Step 5: Your LogTag is NOW ready. TO START – NB! Push and hold down the „start button‟, The word STARTING will flash on the screen. Only release when the word Starting STOPS FLASHING. Your recorder is now ACTIVE and will begin recording, AFTER the delay time setting (eg: 30 minutes) has passed. - Page 5 The temperature parameters you set only dictate when the alert indicator will show and does not affect the recorders reading capacity. LogTag Analyser – edit suggestions: 1. Naming convention _ the user ID on the logtag can appear FIRST in the header of the saved data file in My Logtag Data folder.
- Page 6 Kindly read the USER GUIDE in Logtag Analyser under the HELP menu. Tel: 021 852 7686 Fax: 086 664 7173 Email: info@logtagdata.com 43 Bright street, Somerset West, 7129...