LogTag Recorders UTREL30-WiFi Product User Manual page 18

Preparing a UTREL30-WiFi for first use
From the menu click LogTag - Configure; LogTag
l
configuration options for connected loggers.
The logger will be configured in LogTag
®
LogTag Online can transfer configuration settings containing recording and alarm
parameters to the logger, and automatically start recording temperature data once the
transfer has completed. To do this, following steps are required:
1. Configure the UTREL30-WiFi's wireless network settings using the LogTag
Connection Wizard.
2. Register the device in LogTag
3. Attach the UTREL30-WiFi to a location. During the attachment process, select one of
the pre-defined
the log interval;
l
alarm settings for all alarms; and
l
optionally, a start delay.
l
Once the settings have been applied, you can view them directly in LogTag
for each device. Please refer to the
Please note: This method of configuration sets only a minimal number of pre-
defined parameters to enable logging and transferring real-time data. If you wish
to control the appearance of the PDF file, set advanced options or specify custom
logging parameters please configure the unit using LogTag
UTREL30-WiFi User Guide
®
®
Online.
Logger Configuration
LogTag® Online User Guide
®
Analyzer will display the
Online
Profiles. Each profile contains
®
Online
®
Online
for more information.
®
Analyzer.
18