Plugging The Utrel30-Wifi Into A Usb Port - LogTag Recorders UTREL30-WiFi Product User Manual

Plugging the UTREL30-WiFi into a USB port

Plugging the UTREL30-WiFi into a USB port
What happens when you plug your UTREL30-WiFi into a USB port depends on the
operating system of the computer, the settings made during configuration and whether or
®
not LogTag Analyzer is running.
Microsoft Windows
Several drivers will now be installed, depending on the UTREL30-WiFi's configuration.
All drivers are part of the operating system and will typically not require administrator
privileges for your computer. During driver installation you will see the familiar Windows
notification.
Drivers that are installed may include the following:
Mass Storage Device Driver
l
LogTag Mass Storage USB Device Driver
l
These two devices are required so you can access the data files in the same way as a
USB memory stick. These drivers will not be installed if the UTREL30-WiFi does not
generate files.
USB Input Device (HID) Driver
l
This device is used for communication to LogTag
be installed, even if LogTag
USB Composite Device Driver
l
This driver signals that multiple devices are involved when plugging in a
UTREL30-WiFi.
If you have configured the UTREL30-WiFi to
time you plug the logger into the USB port. While the file creation takes place, the display
shows bUSy instead of the current time.
Once the files are generated, a new drive or mounted device will appear. The device name
will be created from the serial number of the UTREL30-WiFi.
If you have disabled file generation during configuration, no drive will appear.
USB communication can interfere with temperature measurement. While a
UTREL30-WiFi is plugged into a PC's USB port, occasionally a scheduled
temperature reading is not taken. The graph will display a gap and the data list
UTREL30-WiFi User Guide
®
Analyzer is not present on the computer.
generate
®
Analyzer and its driver will always
files, these will be created every
64