Resetting The Logger - LogTag Recorders UTREL30-WiFi Product User Manual

Resetting the Logger

Resetting the Logger
You can reset a UTREL30-WiFi back to its original
be started again.
When performing this procedure all recordings and statistics stored in the logger
are irrevocably deleted and cannot be recovered. Please ensure your data has been
saved!
All configuration settings in the logger, including Wireless and Network settings,
are retained.
For this process to work, the logger must be
.
STOPPED
Press and hold the
symbol will turn on.
READY
When the
STOPPED
button within 2 seconds. The logger is now ready to
be started again.
If the button is released while
disappears, the display shows
means, the data from the previous trip is still accessible.
The ability to reset a logger is enabled or disabled in the
configuring the UTREL30-WiFi via LogTag
button. The
START
/CLEAR/STOP
symbol turns off, release the
STOPPED
STOPPED
UTREL30-WiFi User Guide
state. Once reset, recording can
READY
is still on, or you wait until the
again, and the logger remains stopped. This
Advanced Settings
®
Analyzer.
72
symbol
READY
tab when