Preparing A Utrel30-Wifi For First Use; In The Office; On-Site - LogTag Recorders UTREL30-WiFi Product User Manual

Preparing a UTREL30-WiFi for first use

Preparing a UTREL30-WiFi for first use
Before your UTREL30-WiFi can record temperature data and upload readings to
®
LogTag Online you need to perform a few setup steps.

In the office

These steps are completed in your office, using a PC connected to the internet:
1. Install the backup batteries
2. Download and install the latest version of LogTag
the LogTag Recorders Software Download
3. Configure the unit using LogTag
4. Connect the UTREL30-WiFi to your wireless network using the
Connection Wizard.
5. Complete the device setup in
UTREL30-WiFi with a location.
You can find more information about connecting and setting up your network connection
in Wireless Connectivity on

On-site

Once you have completed this process, you can take the logger to the location where it
will be installed:
1. Connect external power
2. Connect a sensor
3. Start the logger.
4. Test the connection
UTREL30-WiFi User Guide
into the unit.
®
Analyzer software.
®
LogTag
page 28.
if you use the UTREL30-WiFi in a stationery application.
and place the unit, preferably using a wall mount bracket.
®
to LogTag Online to verify data can be successfully uploaded.
®
Analyzer 3. You can do this from
page.
Online, including associating the
LogTag Online
14