Adding The Probe And The Power Supply - LogTag Recorders UTREL30-WiFi Product User Manual

Wireless low-temperature data logger

Hide thumbs Also See for UTREL30-WiFi:

Table of Contents

Preparing a UTREL30-WiFi for first use

After successful completion of the wireless network

test, the Wizard establishes a connection between

the UTREL30-WiFi and the LogTag

server. When completed successfully, the screen on

the right shows.

Please refer to the section about

page 34)

for reasons why the cloud server connection

can fail.

The UTREL30-WiFi is now ready to be deployed.

Adding the Probe and the Power Supply

Before the UTREL30-WiFi can record temperature data you will need to connect an

external probe.

The UTREL30-WiFi accepts any ST10 probe (including an STX50 extension). Plug the probe

connector into the socket located at the bottom of the device, as shown.

For stationary applications we recommend you connect a power

supply (see

Powering the

Remove the protective cap and insert the USB connector.

Note that the wider part of the connector is oriented towards

the rear of the product.

UTREL30-WiFi User Guide

Online cloud

Troubleshooting (on

UTREL30-WiFi).

Table of Contents

Do you have a question about the UTREL30-WiFi and is the answer not in the manual?