Accessing The Files - LogTag Recorders UTREL30-WiFi Product User Manual

Plugging the UTREL30-WiFi into a USB port
will show --- followed by the # symbol. This does not apply when the logger is
connected to a USB power supply.
macOS, OSX and Linux
Typically in these operating systems a new drive will be mounted, from which you can
open the PDF file. You will not be able to configure the UTREL30-WiFi using either of
these operating systems, unless you use virtualization software such as VMWare Fusion,
Parallels Desktop or Virtualbox to create a hosted Windows environment. You need to
discuss these options with your network administrator. Virtualbox is free, while VMWare
and Parallels are offered as paid subscriptions.

Accessing the files

If the logger was configured to generate files, a new drive letter or mounted device will
appear. The device name will be created from the serial number of the UTREL30-WiFi. You
can access the files by browsing to the newly created drive and double-clicking the PDF,
CSV or LTD files.
For PDF files you need Adobe Acrobat Reader or a similar PDF viewer.
l
To open the LTD file you need to install the free LogTag
l
CSV files can be opened with a text editor, or imported into a spreadsheet program
l
such as Microsoft
If a logger has only taken pre-start readings, PDF and CSV files will not be
available.
To retain the logger-generated files, copy them to a permanent storage location
on your computer, such as the
copied.
The data on the logger are retained. Each time you plug the UTREL30-WiFi back
into the computer the files are re-generated, until the device is re-configured.
Once the battery is exhausted, the real time clock on the unit stops and dates and
times for the retained data may no longer be accurate. You will, however, still be
able to access the last trip's data.
UTREL30-WiFi User Guide
®
Excel.
Documents
®
Analyzer software.
folder, as they are not automatically
65