... the device is stored and operated according to LogTag Recorders ’ recommendations. Disclaimer The USRIC-8(M) monitors temperature exposure and not the quality of the goods it accompanies. Its purpose is to signal if product quality evaluation/testing is required. Typographical Conventions...
Buttons button; can be used to start the unit or place an START Depending on the configuration, the USRIC-8(M) may produce all, some or none of /Mark inspection mark in the data listing the files.
Analyzer will scan all USB ports and display the configuration options for connected USRIC-8(M)‘s. Although you can configure many devices at the same time, it is practical to limit the number of devices to about 10, using a powered USB hub. It is not possible to configure different models at the same time.
LogTag Analyzer. A primary upper alarm must be entered before more upper alarms If you configure the USRIC-8(M) to start after a delay period, the can be entered. recorder will not immediately record temperature readings after...
Manually If you have disabled file generation, the USRIC-8(M)'s green OK You can configure a USRIC-8(M) so it can be stopped with the STOP indicator will blink once every second. button. This feature is useful when you take the recorder out of a shipment and don’t want to falsify the statistics with readings taken...
Unplugging You can unplug a USRIC-8(M) at any time; there is no need to stop the device via the shortcut menu in the notification area on the taskbar. If you plug a unit into a USB port during a start delay, the delay period will re-start when the unit is unplugged.
2 ALERT for the recorder to stop. seconds The USRIC-8(M) is connected to a USB port and waiting for USB Two quick flashes of the green indicator Ready for USB communication. every second The USRIC-8(M) is generating files. No USB activity will be observed...
LogTag_[serial_number]_[trip number]_[file creation date]_file creation time]_[OK or ALM]. USB Paused Readings A gap is shown in the graph where the USRIC-8(M) was plugged into Recorder Information and Configuration a USB port at the time it would otherwise have taken a reading.
Alarm Status Box Recorder Information and Configuration This shows at a glance if the USRIC-8(M) recorded alarm conditions On recorders with multiple alarms these sections are combined and ✖ during the trip (showing a red...
Marked readings In the data list readings are marked after the temperature value..with a + symbol where the USRIC-8(M) has been downloaded with LogTag ® Analyzer.
If a default configuration does not suit, customers can compile their own profile by specifying the parameters in the tables below when ordering. ® Please note that minimum order quantities apply for USRIC-8(M) recorders with profiles not stocked by LogTag Recorders .
Technical Specifications Model Numbers Environmental USRIC-8 - Single Trip PDF Temperature Recorder with dual alarms IEC 60529: IP64 with USB cap fitted USRIC-8M - Single Trip PDF Temperature Recorder with 6 alarms Fits into IP67 Protective Enclosure 200-000020 Temperature Sensor Measurement Range Case Material -25°C to +60°C (-13°F to +140°F)