LogTag Recorders UTREL30-WiFi Product User Manual page 38

Display Overview
distributor, as the battery needs to be changed by a qualified technician.
Main Battery Condition
A battery test is performed periodically. Depending on the condition of the battery, all, some or
none of the 4 bars will show. See
ALARM/OK indicator
The symbol is shown as soon as the UTREL30-WiFi has registered an alarm event. While there
are no alarms, or if a previous alarm has been cleared, the
Wireless and Cloud Symbols
These symbols show the current status of your WiFi connection and your cloud connectivity. Learn
more about these in the section about
Recording indicators
The recording indicators show what the UTREL30-WiFi is currently recording.
If is shown, the UTREL30-WiFi is ready to be started with the
READY
l
button. Depending on the configuration it may already record pre-start readings.
If is shown, the logger has been started, and a start delay is active. The word
STARTING
l
is also shown, together with the time in hours and minutes until the start.
DELAY
If is shown, the UTREL30-WiFi is recording temperature at the sample interval defined
l
during configuration.
If is shown together with the word
l
recorded values are not taken into account when calculating alarm events and durations.
If the word
STOPPED
l
Time Value and Time Indicators
The time value display is used to show one of the following:
The current time
l
The time remaining until the logger starts recording (for a delayed start)
l
A duration, for example of an alarm
l
The time indicators identify which of those is displayed as follows:
If is shown, the time value represents the current time in hours and minutes (24- hour
TIME
l
format).
If is shown, the time value represents a start delay, or the time remaining until a
DELAY
l
date/time start will occur.
If is shown, the time value represents the duration, for example the time above
DURATION
l
the upper alarm limit.
The word boot appears in place of the clock if new firmware is being uploaded to the
UTREL30-WiFi.
The word dtstappears in place of a time value if the logger is configured for a date/time start, and
the start time has not yet passed.
UTREL30-WiFi User Guide
Powering the UTREL30-WiFi on page 40
Wireless and Cloud Symbols on page
PAUSED
is shown, the UTREL30-WiFi has finished recording temperature data.
for details.
symbol is shown.
29.
START
, the product is also recording, but the
38
/CLEAR/STOP