Configuring The Utrel30-Wifi For Logging - LogTag Recorders UTREL30-WiFi Product User Manual

Preparing a UTREL30-WiFi for first use UTREL30-WiFi User Guide 16

Configuring the UTREL30-WiFi for logging

Before a UTREL30-WiFi logger can be deployed, it must be configured with the parameters
required for starting and recording temperature values.
Loggers can be purchased unconfigured, or pre-configured, ready to be started, using one
of a number of different profiles that are available. Also, your reseller may have already
configured the device to be connected to your wireless network.
You can check if your logger is already configured or not by briefly pressing the
button.
REVIEW
/MARK
The logger is already configured to start
If your logger is configured to start it will show either
if the logger was pre-configured for a push-button start, or
if the logger was pre-configured for a Date/Time start.
If your logger shows one of these screens you may skip the configuration process.