Real-Time Clock - LogTag Recorders UTREL30-WiFi Product User Manual

Real-Time Clock

The time shown on the recording display is
linked to the logger's internal real-time clock.
A day change occurs when the display time rolls
through midnight (i.e. 00:00), which triggers
the statistical data to be finalized for the day,
and a new day to be started when the next
reading is taken.
Each time the logger is configured with LogTag
Analyzer the display clock value is set to the
PC's current local time (or timezone).
Note that the logger's internal real time
clock value is only updated when the
recorder is configured with LogTag
Analyzer. This prevents the data logging
becoming discontinuous, which would be
the case if the real time clock were to be
changed together with the display clock.
The UTREL30-WiFi's real-time clock
regularly synchronizes with the
®
LogTag Online server when the device
connects to the network. As a result,
the display clock will be automatically
updated when daylight saving begins
and ends.
®
LogTag Analyzer can display the logged
readings in a number of different time zones,
regardless of where it was configured. Please
note, however, that the PDF's time zone has to
be set at configuration and cannot be changed
after the logger has been downloaded.
Page 45
®
®
UTREL30-WiFi Product User Guide, Revision 1.0, copyright © 2004-2020, LogTag Recorders. All rights reserved.