Starting The Logger; Push Button Start - LogTag Recorders TREL30-16 Product User Manual

Starting the Logger

Accept the hours value by pressing
value is now stored, and the display shows the normal
screen.
NOTE: It is advised that the real time clock is only adjusted when the product is
not recording (
If a display clock adjustment is made while recording data, the next log taken will
be identified in the downloaded data with a time change mark.
Changes to the display clock do not affect the internal real time clock value, so the logged
data does not show time gaps.
Starting the Logger

Push button start

The logger's display must show
Press and hold the
:
READY
Then disappears:
READY
TREL30-16 User Guide
or
STOPPED READY
READY
button. First,
START
/CLEAR/STOP
. The new clock
) to avoid large shifts in day boundary data.
for it to be started. The current time is also shown.
STARTING
is shown in addition to
19