Turning The Projector On Or Off; Logging On To The Projector; Logging Out Of The Projector; Turning The Touch Panel On Or Off - Christie CineLife+ CP4415-RGB User Manual

3. Communication between the projector and the connected chiller is confirmed, and coolant
temperatures are correctly maintained.
If a thermal shutdown occurs in a dual projector installation, verify that the chiller
communication cables are connected correctly between each projector-chiller pair. This ensures
that there is no cross-connection relative to the coolant lines.

Turning the projector on or off

Turn on the projector to display content, or turn off the projector to conserve energy or service the
projector.
To operate the projector, the circuit breakers must be in the ON position. If you are servicing the
projector or removing the protective covers, ensure that the MAIN and UPS circuit breakers are in the off
position.
In the right toolbar, select and hold Power.
If the light source is on when turning off the projector, the light source enters a ten-minute
cool-down period automatically.

Logging on to the projector

Log on to the projector to access projector menus.
1. Select Login.
2. In the User list, select a user name.
3. Enter your password.
4. Select Login.

Logging out of the projector

Log out of the projector to restrict access to projector menus or to change access permissions.
• Select Logout.

Turning the touch panel on or off

Turn the touch panel on to view projector menus, or turn the touch panel off to conserve energy.
• To turn the touch panel on or off, press the power button
CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB
020-103073-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Operating the projector
(A) on the top of the touch panel.
21