Multi-Point Lock
FM7300 Series and BL7300 Series
Installation Instructions
3
Installation (cont.)
i
Mortise Lock Install
• Remove the two (2) #12-24 x1" flat head
mounting screws. (Figure 22)
• Remove the mortise lock filler and discard.
(Figure 23)
• Install the mortise lock, two (2) #12-24 x1" flat
head mounting screws, outside front, and two
(2) #8-32 x1/4" flat head screws. (Figure 24)
1-800-727-5477 • www.sargentlock.com
Copyright © 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
Figure 24
Figure 22
Mortise Lock Filler
Figure 23
12
A8220D 04/20