Addendum; Check Door; Place Door Horizontal On Sawhorse - Assa Abloy SARGENT FM7300 Series Installation Instructions Manual

Multi-Point Lock
FM7300 Series and BL7300 Series
Installation Instructions
5

Addendum

This addendum is to be used as a reference for pre-installed hardware (latches and cassette). The
following steps are for ease of reference as they have been completed in advance by the door
manufacturer.
a

Check Door

Verify the door is:
• Correct size and hand for opening.
• Correctly prepared to Template 4740.
(Figure 34)
IMPORTANT
If measurement is incorrect, DO NOT PROCEED
WITH INSTALLATION. Contact door manufacturer.
b

Place Door Horizontal on Sawhorse

(Figure 35)
Note:
Orient the door face holes on top.
1-800-727-5477 • www.sargentlock.com
Copyright © 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
39-9/16"
(101.4 cm)
Figure 35
17
Outswing Door
Shown
L C
of Lockbody
± 5/64"
Door Width
Figure 34
A8220D 04/20