Mortise Lock Install - Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual

Multi-point lock

Hide thumbs Also See for Corbin Russwin FE6600 Series:

Table of Contents

FE6600 and BL6600 Series

Multi-Point Lock

Installation Instructions

Installation (cont .)

Mortise Lock Install

1. Remove two (2) #12-24 x1" flat head mounting

screws. (Figure 22)

2. Remove mortise lock filler and discard.

(Figure 23)

3. Install mortise lock, two (2) #12-24 x1" flat

head mounting screws, outside front, and

two (2) #8-32 x1/4" flat head screws.

(Figure 24)

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Figure 24

Figure 22

Mortise Lock Filler

Figure 23

FM440 03/20

Table of Contents

Do you have a question about the Corbin Russwin FE6600 Series and is the answer not in the manual?

Corbin russwin bl6600 series