Summary of Contents for Assa Abloy Sargent KP Series
Page 1
KP Series Keypad Mortise Lock Installation & Programming Instructions A7373D 07/18 Copyright 2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Table of Contents Warning ...................3 General Description ..............4 Specifications ................4 Features ...................5 Parts Breakdown ..............6 Installation Instructions ............8 Operational Check ..............19 Programming Instructions ............19 Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
Keypad Mortise Lock General Description The SARGENT KP Series Mortise Lock is designed for areas which require stand alone authorized entry. It is a self-contained microprocessor-controlled keypad with non-volatile memory. The keypad holds a total of 100 different user codes. User codes 01, 02 and 03 are utilized for Master Code, Emergency Code and Supervisory Code, respectively.
Page 5
KP Series Keypad Mortise Lock Features (continued) KP8276 KP8278 • Deadbolt function • Deadbolt function • Cylinder override provided • Cylinder override provided KP8277 KP8279 • No cylinder override • No cylinder override • No deadbolt function • No deadbolt function Keypad •...
KP Series Keypad Mortise Lock Parts Breakdown KP Series Parts List KP8276 ONLY KP8278 Inside of Door Outside of Door 1-800-810-WIRE • www.sargentlock.com • A7373D...
Page 7
KP Series Keypad Mortise Lock Parts Breakdown (Continued) Part # Req. Item Description 01-0803 Battery Alkaline (“C” cell) 01-1119 #8-32 x 1-1/2 Flat Head Screw 01-0297 Security Socket Screw Key (1/8) 01-1157 #8-32 x 1-1/4 Phillips Pan Head Screw 01-0440 Flat Washer 81-0467 Inside Lever (L.H.) A”...
KP Series Keypad Mortise Lock Installation Instructions Step #1 – Verify Hand and Bevel of Door A. Verify Hand and Bevel of Door Stand on outside/locked side of door when determining the door hand LHRB RHRB Left Hand Left Hand Right Hand Right Hand Hinges Left...
Page 9
KP Series Keypad Mortise Lock Step #2 – Verify Hand and Bevel of Door A. Reverse Lock Hand Red surface of locking piece must face the outside/locked side of door. To rotate locking piece (Fig. 2A): 1. Position lock body with red surface of locking piece visible. 2.
Page 10
KP Series Keypad Mortise Lock Step #3 – Install Lock Body Inside of Door 1. Insert lock body into mortised cutout (Fig. 3A). Fig. 3A 2. Hold lock body loosely in place with (2) lock body screws. Note: Do not completely tighten screws at this time. Outside of Door Harness exits Non-Cylinder side...
Page 11
KP Series Keypad Mortise Lock Step #4 – Exterior Door Options A. Fire Stop Plate (P/N 53-0033) Fire-rated doors require a fire stop plate on the outside of the door (Fig. 4A). 1. Drill (2) 1/8” x 1-1/4” deep holes Ribbon Cable Hole in the door if not already present.
Page 12
KP Series Keypad Mortise Lock Step #6 – Install Outside Escutcheon and Lever Assembly Install Outside Lever Assembly 1-800-810-WIRE • www.sargentlock.com • A7373D...
Page 14
KP Series Keypad Mortise Lock Step #8 – Inside Lever Installation 1-800-810-WIRE • www.sargentlock.com • A7373D...
Page 15
KP Series Keypad Mortise Lock Step #8 – Continued 1-800-810-WIRE • www.sargentlock.com • A7373D...
Page 16
KP Series Keypad Mortise Lock Step #9 – KP8276 and KP8278 Only - Install Cylinder Position cylinder so that the SARGENT logo is right-side up. Correct Incorrect 1-800-810-WIRE • www.sargentlock.com • A7373D...
Page 17
KP Series Keypad Mortise Lock Step #10 – Application of Front Plate Step #11 – Battery Installation 1-800-810-WIRE • www.sargentlock.com • A7373D...
KP Series Keypad Mortise Lock Operational Check • Place key into cylinder and rotate key. • The key will retract the latchbolt. • If the deadbolt is thrown, the key will retract both the deadbolt and the latchbolt. • Inside handle lever retracts latchbolt and (if provided). •...
Page 19
KP Series Keypad Mortise Lock This Keypad Mortise Lock has 99 User Codes available for programming purposes. • The Master Code is always User “01”. The Master Code assigns the Emergency and Supervisory Codes. It is also used for programming and will override the deadbolt .
Page 20
KP Series Keypad Mortise Lock All of the following procedures start with 99# (continued). If after the last “ ” is depressed, the yellow LED does not go out, depress “*” once more. To Enter a Passage (Maintained Mode) Code: When Passage Mode is used, the same User Code must be used to re-lock the lock.
Page 21
KP Series Keypad Mortise Lock All of the following procedures start with 99# (continued). If after the last “*” is depressed, the yellow LED does not go out, depress “*” once more. To Interrogate Transaction Log: • Supervisory or Master Code* (Yellow LED Begins to Blink Slowly) •...
Page 22
KP Series Keypad Mortise Lock Transaction Log To output the last 15 entries, enter 99 # Supervisory or Master Code * 70 # 0 # 0 # **. Note: Seq. # 1 is the Door Number programming request to output the entries. •...
Need help?
Do you have a question about the Sargent KP Series and is the answer not in the manual?
Questions and answers